Welcome to 192.168.1.1 Router Login Portal

192.168.1.1 192.168.l.l is the primary IP address default for most routers. http://192.168.1.1 is a private IP address that you will find in various router devices such as D-Link, Netgear, Linksys, etc.

You will require 192.168.l.l to access your router admin panel.  IP addresses are given to your router by the internet-assigned number authority.

192.168.1.1 Admin Login

192.168.0.1 Admin Login

 

How to log in to 192.168.1.1?

If you wish to login into 192.168.1.1 or 192.168.l.l, then you must follow the procedure given below-

  1. First, you have to open a web browser and follow this link. Alternatively, you can also type 192.168.1.1 in your URL section.
  2. A login page will appear where you must enter your user login name and password.
    192.168.1.1 login
  3. Fill in the space by providing your username and password there. (Note that most of the routers will have the default username and password set as username-admin, password-admin)
  4. You’re now logged in to the admin panel of your router. 

Note: If you’re still unable to access the router’s admin panel at 192.168.1.1, your network might be using some other address, so try using 192.168.0.1, 10.0.0.1, or 192.168.2.1

Forgot the IP Address (192.168.1.1), username and password?

If you have tried entering the default username and password, but it still shows an error, you might have changed it, which you do not remember. In that case, you can follow the possible methods given below-

  • Check your router’s box or the backside, where you can find the login details. 
  • You also can check the default username and password list and try the credentials.
  • You can factory reset your router if you think you’ve changed it. A small RESET button will be available on the backside of your router. Press and hold the button for 10-15 seconds(with the help of a needle). The router will reboot and will be back to its default settings.

How to change the Router’s IP Address?

If you want to change your router’s IP address, you must follow some basic steps as mostly it comes as pre-assigned by your internet provider. However, you can change it anytime according to your own requirements.

We generally change it to save the admin panel from any attack. Let us see how to do it for various router brands-

TP-Link-

To change it for TP-Link, follow the process given below-

  1. At 192.168.1.1 or 192.168.0.1, 192.168.l.l, you must log in by entering the default username and password. 
  2. Now go to the advanced settings and tap network and LAN from it.
  3. You can find the IP address option. In that, you can change your IP address.
  4. Now save it and let the router reboot to save the new changes.

TP Link Login detailed guide.

D-Link-

Follow the steps.

  1. Use the default credentials and log in to the router configuration page. 
  2. Now hover over Setup> Network Settings.
  3. You will see the router IP address field there.
  4. Please change it to your preference and save the settings.

D-Link Login detailed guide

NETGEAR-

  1. Go through the link and log in to your NETGEAR router setting page. Either go to http://www.routerlogin.com. Or type 192.168.1.1.
  2. If you’ve logged in, go to the advanced and setup option from the menu. SETUP>LAN SETUP.
  3. Now, under the option, you will see the IP address. Change the given default address to your preferred one.
  4. Save the changes, and the router will reboot to apply the desired changes.

NETGEAR Login detailed guide.

In any of the cases, if you’re still unable to change the settings, you can reset your router again to the default factory settings and try changing it again.

This was all about the router IP address 192.168.1.1. We have covered all the aspects you must know while using or changing this IP address to your desired address.

It is crucial to protect your Wi-Fi from any malicious activity or attacks.

You can also disable WPS, enable WPA2 encryption, and keep updating your router firmware to keep it safe and secure.

If you want to know more, check out our guide titled How to protect your WiFi Network.

FAQs

What is 192.168.1.1?

192.168.1.1 is a default Local Area Network (LAN) address many routers use. It is a gateway, DHCP, and DNS server for your LAN.

Can I access my router using 192.168.1.1?

Yes, 192.168.1.1 is often the local address of your router. You can access the router’s configuration and settings by entering this address in a web browser.

Why can’t I access my router using 192.168.1.1?

There could be several reasons. Ensure you’re connected to the correct network, the router’s default address hasn’t been changed, or there might be a temporary network issue. Restarting the router can sometimes resolve access issues.

Is 192.168.1.1 exclusive to a specific brand of routers?

No, 192.168.1.1 is a common default IP address used by various router brands. However, some brands might use a different default address.

Can I change the default IP address of my router from 192.168.1.1?

Yes, most routers allow you to change the default IP address through their configuration settings. Ensure you remember the new address to avoid access issues in the futur

I hope this guide will get you all the answers related to the 192.168.1.1 router IP address.

However, if you’re still struggling, please let us know in the comment section below.